Forums

Welcome to the club forums

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.





Pages: [1]
Author Topic: Open Invitational Event
DeWalt
Newbie
Posts: 13
Permalink
Post Open Invitational Event
on: December 24, 2011, 15:42
Quote

MMPBC Open Invitational Event

Fellow Model Power Boaters

Manukau Model Power Boat Club is holding a Two day event, with racing of multiple boat classes.
This event will be held on the 11th and 12th of February 2012 at Wattle Farm Pond Manurewa

A $10.00 fee for the weekends racing will apply for members and visitors.
There will be a Gate Draw and your entry fee will go towards the draw. You will be given a ticket when you pay your race fees and the tickets will be given out between 8.30am and 9.00am.
BBQ will be in operation for the boaters and drinks will be available as well.
The usual 87db noise limit will be strictly adhered to, and MMPBC racing rules will apply.
There is a minimum entry of two boats for each class, for that class to run at the event, if two entries in a class you will only run three heats, three boats and above and you will do four heats.
This event is going to be run with a different format,
we will race the first two heats of one class, then move on to the first two heats of another class and so on...and so on………

Classes avail to be run at the event is as below, dependent on entries.

Gas semi scale Hydro (T1 & T2 Hydro)
Gas petrol sport Hydro
1/8 Scale Nitro Hydro (C scale)
Sport 45 Hydro
Class II Offshore up to 7.5cc (deep vee, mono, cat)
Class I Offshore 10cc up to 35cc (deep vee, mono, cat)
Multiboats (Mono) all engine sizes up to 35cc
N-2 Offshore
Ltd P Hydro
N-2 Hydro
Ltd P Offshore
1/8 Scale Elect Hydro
Rigger (Open Class, Nitro, Petrol, Electric)

King of the lake (any boat any class may enter this event)

Limited Billets will be avail on a first in first served basis.

Entry Forms will be sent out in the new year.

Jason
Image

You must be fast, cuz you were hauling azz when I passed you !!!

DeWalt
Newbie
Posts: 13
Permalink
Post Re: Open Invitational Event
on: January 23, 2012, 23:27
Quote

Entry forms have been emailed out.

ENTRY FEE: $10.00 For the whole weekend
ENTRIES CLOSE: 5th February 2012 Email to: Secretary@rcboats.co.nz
LATE ENTRIES: $10.00 Per Event, cut-off 9th February 2012
Conditions of Entry
Entries must be emailed using the form (Verbal or assumed entries not accepted)
If you have not been emailed the entry form please contact me at Secretary@rcboats.co.nz

MMPBC Racing Rules will apply.
Entry Fee must be paid before racing starts.
Class Racing Rules can be found here: http://forums.rcboats.co.nz/viewforum.php?f=22

Reminder no smoking in the pits

Jason

You must be fast, cuz you were hauling azz when I passed you !!!

DeWalt
Newbie
Posts: 13
Permalink
Post Re: Open Invitational Event
on: February 6, 2012, 22:52
Quote

Hi All

Due to lack of numbers this regatta will now only be run on the Sunday the 12th Feb, note the earlier start and drivers brief time.
The pond will be avail for tuning on the Saturday 10-3pm, contact if you require the dinghy on-site.
Attached is intended programme which is subject to change.
Late entries will be accepted up till Thursday 9th Feb $10 per event

MMPBC Open Invitational Event
Sunday Programme
08.15 - 08.30am – Setup/ Drivers Briefing
(All Competitors must be at Drivers Brief to Race unless prior arrangement has been made. All boats on the water must have a pit-person)
N2 Hydro - Heat 1
Electric 1/8th Scale Hydro Heat 1
Nitro 1/8th Scale Hydro- Heat 1&2
Mono 0.21ci (multihull) – Heat 1&2
Sport 45 Hydro- Heat 1&2
Mono .91ci (multihull) - Heat 1&2
Electric 1/8th Scale Hydro Heat 2
Class 1- Heat 1&2
Rigger- Heat 1&2
Petrol sport Hydro Heat 1&2
Mono 0.21ci (multihull) – Heat 3
Lunch
N2 Hydro - Heat 2
Mono 0.45ci (multihull) – Heat 1&2
Nitro 1/8th Scale Hydro- Heat 3&4
Electric 1/8th Scale Hydro Heat 3
Mono .91ci (multihull) - Heat 3
Sport 45 Hydro- Heat 3&4
Mono 0.21ci (multihull) – Heat 3
Class 1- Heat 3&4
Rigger- Heat 3
Mono 0.45ci (multihull) – Heat 3
Electric 1/8th Scale Hydro Heat 4
Petrol sport Hydro Heat 3
King of the Lake
Pack up raffle draw

See you there

Jason

You must be fast, cuz you were hauling azz when I passed you !!!

DeWalt
Newbie
Posts: 13
Permalink
Post Re: Open Invitational Event
on: February 14, 2012, 21:23
Quote

MMPBC Open Invitational Event
Well what an interesting day, everybody arrived early and got to work with the setup of the course, followed by a quick drivers brief.
The first race up was N2 Hydro with Phil taking the win with Spider and Chris bringing Tahoe Miss in Second place, with Jason driving Motul into a Buoy on the first lap.
The second race run was electric 1/8th Scale Hydro, with four boats starting the race it looked like it was going to be a fun close race, DeWalt and Miss Elam broke the line at the start, then it all changed when Merv tripped on a wake with Peters and May flipped over on the end of the front straight. Phil put Miss Elam over backwards coming downwind of all places, it got a good 4ft of air underneath it, Chris with Llumar then went on to take the win with DeWalt coming in second.
The next race up was the 3.5cc Multiboats, which Jason was lucky to have a run with Herman’s spare boat. His first run didn’t go to well only managed to get two laps done in the ten minutes to run the heat, Herman had a few problems and withdrew from the heat, Tony took the win with 15 laps.
The Second heat of the 3.5cc Multiboats and it was Tony’s turn to have problems and only do two laps, Herman done 15 laps and Jason managed to take the win with 17 laps.
We tried for a heat with the 1/8th Scale Nitro Hydro’s but it proved to be a bit rough to run with none of the three boats launched even making it to the start.
Next up was a heat with the 15cc Multiboats in which Herman took the win with 15 laps, Tony had problems with his boat and was forced to withdraw for the day.
The water was a little choppy for the hydro’s so we went on to run the 7.5cc Multiboats where Jason got offered to run Herman’s spare boat.
The first heat went well with Tony taking the win with 22 laps, Jason doing 20.5 laps and Herman doing 11 laps before a bearing in the gearbox decided to play up.
The second heat started with only Tony and Jason entered, Tony took the win with 19 laps and Jason only doing 4 laps before he had radio problems.
After some testing with the Sport 45’s and the Riggers it was decided it was getting a little too rough, so everyone packed up, the raffle draw was held with Tony winning the $50 prize.

You must be fast, cuz you were hauling azz when I passed you !!!

Catalystra-
cing
Beginner
Posts: 29
Permalink
Post Re: Open Invitational Event
on: February 14, 2012, 22:55
Quote

Thanks for the report, certainly sounds like like an eventful event 🙂

DeWalt
Newbie
Posts: 13
Permalink
Post Re: Open Invitational Event
on: February 23, 2012, 21:05
Quote

1st Heat Electric 1/8th Scale Hydro

1st Heat 3.5cc Multiboat

You must be fast, cuz you were hauling azz when I passed you !!!

DeWalt
Newbie
Posts: 13
Permalink
Post Re: Open Invitational Event
on: February 23, 2012, 22:18
Quote

2nd Heat 3.5cc Multiboat

You must be fast, cuz you were hauling azz when I passed you !!!

Pages: [1]

Leave a Reply

Feedback
Scroll to Top